Bearing capacity of strip foundations reinforced with geogrid sheets by using upper bound finite‐element limit analysis     

Jyant Kumar  Jagdish Prasad Sahoo 《国际地质力学数值与分析法杂志》2013,37(18):3258-3277

By using the upper bound finite‐elements limit analysis, with an inclusion of single and two horizontal layers of reinforcements, the ultimate bearing capacity has been computed for a rigid strip footing placed over (i) fully granular, (ii) cohesive‐frictional, and (iii) fully cohesive soils. It is assumed that (i) the reinforcements are structurally strong so that no axial tension failure can occur, (ii) the reinforcement sheets have negligible resistance to bending, and (iii) the shear failure can take place between the reinforcement and soil mass. It is expected that the different approximations on which the analysis has been based would generally remain applicable for reinforcements in the form of geogrid sheets. A method has been proposed to incorporate the effect of the reinforcement in the analysis. The efficiency factors, η_c and η_γ, to be multiplied with N_c and N_γ , for finding the bearing capacity of reinforced foundations, have been established. The results have been obtained (i) for different values of ? in case of fully granular and cohesive‐frictional soils, and (ii) for different rates at which the cohesion increases with depth for a fully cohesive soil. The optimum positions of the reinforcements' layers have also been determined. The effect of the reinforcements' length on the results has also been analyzed. As compared to cohesive soils, the granular soils, especially with higher values of ?, cause a much greater increase in the bearing capacity. The results compare reasonably well with the available theoretical and experimental data from literature. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Analytical solutions for Euler–Bernoulli beam on visco‐elastic foundation subjected to moving load     

Dipanjan Basu  N. S. V. Kameswara Rao 《国际地质力学数值与分析法杂志》2013,37(8):945-960

Analytical solutions for the steady‐state response of an infinite beam resting on a visco‐elastic foundation and subjected to a concentrated load moving with a constant velocity are developed in this paper. The beam responses investigated are deflection, bending moment, shear force and contact pressure. The mechanical resistance of the foundation is modeled using two parameters k_s and t_s — k_s accounts for soil resistance due to compressive strains in the soil and t_s accounts for the resistance due to shear strains. Since this model represents the ground behavior more accurately than the Winkler spring model, the developed solutions produce beam responses that are closer to reality than those obtained using the existing solutions for Winkler model. The dynamic beam responses depend on the damping present in the system and on the velocity of the moving load. Based on the study, dynamic amplification curves are developed for beam deflection. Such amplification curves for deflection, bending moment, shear force and contact pressure can be developed for any beam‐foundation system and can be used in design. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Nonlinear bacterial load‐streamflow response on a marine beach          下载免费PDF全文

Wai Thoe  Joseph Hun‐wei Lee 《水文研究》2015,29(6):1238-1251

Bacterial concentration (Escherichia coli) is used as the key indicator for marine beach water quality in Hong Kong. For beaches receiving streamflow from unsewered catchments, water quality is mainly affected by local nonpoint source pollution and is highly dependent on the bacterial load contributed from the catchment. As most of these catchments are ungauged, the bacterial load is generally unknown. In this study, streamflow and the associated bacterial load contributed from an unsewered catchment to a marine beach, Big Wave Bay, are simulated using a modelling approach. The physically based distributed hydrological model, MIKE‐SHE, and the empirical watershed water quality model (Hydrological Simulation Program – Fortran) are used to simulate streamflow and daily‐averaged E. coli concentration/load, respectively. The total daily derived loads predicted by the model during calibration (June–July 2007) and validation (July–October 2008) periods agree well with empirical validation data, with a percentage difference of 3 and 2%, respectively. The simulation results show a nonlinear relationship between E. coli load and rainfall/streamflow and reveal a source limiting nature of nonpoint source pollution. The derived load is further used as an independent variable in a multiple linear regression (MLR) model to predict daily beach water quality. When compared with the MLR models based solely on hydrometeorological input variables (e.g. rainfall and salinity), the new model based on bacterial load predicts much more realistic E. coli concentrations during rainstorms. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Limiting equilibrium method for slope/drilled shaft system     

Mohammad Yamin  Robert Y. Liang 《国际地质力学数值与分析法杂志》2010,34(10):1063-1075

The use of drilled shafts to stabilize an unstable slope has been a widely accepted practice. There are two basic design and analysis issues involved: one is to determine the global factor of safety of the drilled shafts stabilized slope and the other one is to determine the design earth thrust on the drilled shafts for structural design of the shafts. In this paper, a limiting equilibrium method of slices based solution for calculating global factor of safety (FS) of a slope with the presence of a row of drilled shafts is developed. The arching mechanisms due to the presence of the drilled shafts on slope were taken into account by a load transfer factor. The method for calculating the net force applied to the drilled shaft from the soil mass was also developed. The interrelationships among the drilled shaft location on the slope, the load transfer factor, and the global FS of the slope/shaft system were derived utilizing the developed numerical closed‐form solution. An illustrative example is presented to elucidate the use of the solution in optimizing the location of the drilled shafts on slope to achieve the desired global factor of safety of the slope/shaft system. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

一种污水排海的近远区计算与控制方法──以大亚湾水容量计算及污水排海为例     

韩保新  彭海君  曾小清  胡康萍  吕先林 《热带海洋学报》1996,(4)

针对点容量计算中混合区限制的要求，采用了动量积分法、经验公式法和有限差分法，分别对污水排放后可能引起的近区、过渡区和远区的污水浓度变化进行了模拟预测，并就一定的限制性条件对容量点近区、高浓度混合区及容量点远区影响范围进行了分析。在大亚湾水容量计算及污水排海规划中的应用表明，该法具有计算机时较省、精度相对较高等优点。  相似文献   

Treatment of Hydrodynamic Loading for Random Sea State     

Anjan Sarkar  Suhail Ahmad  T. K. Datta M. Tech. Student Assistant Professor 《中国海洋工程》1996,(3)

- In order to employ cost effective frequency domain analysis for off-shore structures treatment of hydrodynamic loading is essential. Drag and inertia dominated, resonating and antiresonating cases under random sea states are analyzed to highlight the implications and relative merits of four salient linearization techniques.  相似文献   

Two-Dimensional Mathematical Model of Tidal Current and Sediment for Oujiang Estnary and Wenzhou Bay   总被引：1，自引：0，他引：1  

LU  Yongjun 《中国海洋工程》2002,16(1):107-122

A 2-D mathematical model of tidal current and sediment has been developed for the Oujiang Estuary and the WenzhouBay. This model accomodates complicated features including multiple islands, existence of turbidity, and significant differ-ence in size distribution of bed material. The governing equations for non-uniform suspended load and bed load transport arepresented in a boundary-fitted orthogonal curvilinear coordinate system. The numerical solution procedures along with theirinitial conditions, boundary conditions, and movable boundary technique are presented. Strategies for computation of thecritical condition of deposition or erosion, sediment transport capacity, non-uniform bed load discharge, etc. are suggested.The model verification computation shows that, the tidal levels computed from the model are in good agreement with the fielddata at the 18 tidal gauge stations. The computed velocities and flow directions also agree well with the values measuredalong the totally 52 synchronously observed verticals distributed over 8 cross sections. The computed tidal water throughputsthrough the Huangda‘ao cross section are close to the measured data. And the computed values of bed deformation fromYangfushan to the estuary outfall and in the outer-sea area are in good agreement with the data observed from 1986 to 1992.The changes of tidal volumes through the estuary, velocities in different channels and the bed form due to the influence of thereclamation project on the Wenzhou shoal are predicted by means of this model.  相似文献   

全站仪内供电系统的保养     

曾振华  白强林  郭文剑 《海洋测绘》2006,26(4):69-71

全站仪是由电子经纬仪与光电测距仪组合的仪器,是集自动测距、测角、计算、数据存储及数据传输于一体的自动化、数字化及智能化的三维坐标测量与定位系统,是一种当今广泛应用于大地测量、工程测量、数字化测图的电子测量仪器,是现代测绘行业最主要、最普通的测绘仪器,仪器的维护和供电系统的保养,已经成为测绘生产单位的一项工作。  相似文献   

水产膨化饲料   总被引：2，自引：0，他引：2  

王渊源  张敏  刘金才 《台湾海峡》2001,20(Z1):101-106

本文综述了水产膨化饲料的优势、加工原理、膨化对营养素的影响、投喂技术和投喂海水养殖鱼类的试验结果.  相似文献   

随机载荷下的疲劳损伤计算公式     

伍义生 《海洋工程》1994,(1)

本文推导了随机载荷下的疲劳损伤计算公式。数值计算结果表明：Ｐ．Ｈ．Ｗｉｒｓｃｈｉｎｇ给出的公式在宽带情况下与实际情况不符；Ｇ．Ｃｈａｕｄｈｕｒｙ给出的公式在窄带情况下与实际不符；本文绘出的公式不仅适合于窄带，也适合于具有各种不同带宽的宽带随机载荷。  相似文献